Here it is with the new plexi & art that arrived this week.
The start & select are Hori & don't fit well - soon to be replaced with Sanwa (& better colours).
Also the Red balltop will be replaced with one of those nice seimitsu transparent swirly ones.
You might not be able to see but the plexi has the PS3 button symbols etched beside each button.
(http://i58.photobucket.com/albums/g252/maelgrim1/MY_HRAP.jpg)
sorry about this pic, tad blurry as camera was handheld in rubbish light.
I DEMAND A BETTER PHOTO!! so I can see the etching dude ;)
Nice job maelgrim! Where is the image from, looks final fantasy/ vampire hunter D styles.
Doh, I think I jizzed...
Damn just put the camera away :)
I'll get a better shot tomorrow in some natural light.
But yeah its fantasy - the pic is by John Howe who is more famous for his Lord of The Rings art (including being a concept artist for PJ's films).
I didn't have to do much as I got Art (the guy's name) to cut the image to match the plexi top. Will & Lenny also got some Plexi's so will be cool to see what they do.
edit. here is the site for those interested
http://www.tek-innovations.com/arthobbies/?loc=
Quote from: maelgrim on August 26, 2009, 06:39:01 PM
Damn just put the camera away :)
I'll get a better shot tomorrow in some natural light.
But yeah its fantasy - the pic is by John Howe who is more famous for his Lord of The Rings art (including being a concept artist for PJ's films).
I didn't have to do much as I got Art (the guy's name) to cut the image to match the plexi top. Will & Lenny also got some Plexi's so will be cool to see what they do.
Nice connections bro. Did you buy him a drink afterwards ;)
Cannot wait to see Will and Lenny's customs. Lenny, you busting out the spongebob? ;D
Daym looks nice, Ive still got to get artwork done, have a few ideas in mind. How did you go with the joystick? Cause there is a screw plate underneath the TE panel which isnt on the plexi so im just wondering about that, ive seen a pic of a HRAP with a thick piece of plexi with holes drilled into it and place under it, dont really want to get that done tho.
The stick is the original HRAP Sanwa JLF.
Once HRAP opened up you can stick a screw driver into the bottom of the stick (for leverage) and then the ball will just screw off nice n easy.
Then you can slide your art & plexi over the top without the ball getting in the way.
The plexi sits on top of the orginal top plate - so the edges are no longer flush with the base - but no problem.
Anyway here is ART's instructions
http://www.tek-innovations.com/arthobbies/index.cfm?loc=about&sub=covers
Also here is a pic on ART's site of the button etching
http://www.tek-innovations.com/arthobbies/index.cfm?loc=about&sub=custom
Ahhh yes I get it now, ill have to look around now for some ideas on artwork before I get into taking my stick apart, this could take awhile ;D :P
Nice job Mael.
Bill approves.
Quote from: ILL_BILL on August 26, 2009, 09:29:06 PM
Nice job Mael.
Bill approves.
You approve of editing wangs to become a child molester... I dont think thats good man!
Quote from: stereomonkey on August 26, 2009, 11:08:55 PM
Quote from: ILL_BILL on August 26, 2009, 09:29:06 PM
Nice job Mael.
Bill approves.
You approve of editing wangs to become a child molester... I dont think thats good man!
For a Mod, you sure do jack a lot of topics. Nearly as many as i do. :P
My sacrifice is the country's gain. Im nothing if not a patriot.
Yeah, gotta stop jumping to the opportunity. Lol
Anyway, get those sticks completed up up here guys :D
Hey man, i tried to do art on mine and couldnt get a sweet place to print it out properly. Where abouts did you do it and would you be able to print on for me?
Quote from: dejct on August 27, 2009, 04:12:05 PM
Hey man, i tried to do art on mine and couldnt get a sweet place to print it out properly. Where abouts did you do it and would you be able to print on for me?
I got it printed at the same place I got the plexi (so I knew it would be cut properly to match).
However there should be plenty of local printing companies that would have no problems doing what you need.
Where abouts did you get them done?
As mentioned earlier in the thread, http://www.tek-innovations.com/arthobbies/?loc=
Quote from: fluxcore on August 27, 2009, 05:13:55 PM
As mentioned earlier in the thread, http://www.tek-innovations.com/arthobbies/?loc=
Cool Gundam stick ya... 8)
Thought Id share the templates that Im gonna put in my HRAP and TE sometime this week.
lol spongebob got the boot.
http://img41.imageshack.us/img41/7362/spawntefull1.jpg
http://img134.imageshack.us/img134/3743/ryusagathrap3template.jpg
Washu reckon!?!?!
Spawn is overrated and the Ryu one looks weird. I don't like how Ryu's body looks.
I DEMAND SPONGEBOB!
Quote from: stereomonkey on September 07, 2009, 01:23:39 PM
Spawn is overrated and the Ryu one looks weird. I don't like how Ryu's body looks.
I DEMAND SPONGEBOB!
I kind of agree with the Ryu one... his anatomy looks weird, although that's a freaking sore looking SHOOOOORYUKENNNNNN!!!!
Never really got into Spawn... I may need to do some Wikipedia-ing... he looks gangsta lol
^ Omg, amateurs.
Anyway. Spawn one is <3.
The only reason why I don't like the Ryu one is cause THAT'S WHERE THE KING OF THAILAND GOT HIS FUCKING SCAR BEACH
Nice, I like the Spawn pic best.
How bout a cool Gen image :)
Quote from: maelgrim on September 07, 2009, 03:08:41 PM
How bout a cool Gen image :)
This is a WINNER! Listen to the man Lenny, pimp you stick with some KFG!
Quote from: Lennysaurus Rex on September 07, 2009, 01:18:30 PM
Washu reckon!?!?!
That you get me/Suzannah to do one for you ;), you could make such a fuckin' sick Spawn stick. You should see the M.Bison stick I'm working on. Yeeeyah Booyyyyy!
Quote from: geneterror on September 07, 2009, 03:37:11 PM
Quote from: Lennysaurus Rex on September 07, 2009, 01:18:30 PM
Washu reckon!?!?!
That you get me/Suzannah to do one for you ;), you could make such a fuckin' sick Spawn stick. You should see the M.Bison stick I'm working on. Yeeeyah Booyyyyy!
haha yeah i was gonna ask you one day and "upgrade" to your one lol.
I fucking love spawn. I reread the comics almost yearly.
thats a sweet spawn artwork thingy....
ACtually for the HRAP i might do something blazblue. I might have a crack at a Carl one.
Quote from: Lennysaurus Rex on September 07, 2009, 07:21:12 PM
ACtually for the HRAP i might do something blazblue. I might have a crack at a Carl one.
I believe they have made some BB art available to help with the EU cover design comp.