I know a couple of you have enquired as to gamepads that you can hack for the 360, well I found one.
JBHifi has the official MS wired controllers for $65 which are the common line 'late revision' model, as seen here: http://slagcoin.com/joystick/pcb_diagrams/360_diagram1.jpg
You'll want to peer through the packaging to see the back of the label - if there's that rubbish bin icon in the bottom left corner of the label (as seen in that picture) then chances are it's a common line pcb suitable for hacking.
Please note these controllers are NOT common ground, which causes problems if you want to dual-mod with another pcb. There are ways around it, but they are annoying.
Still not the easiest thing to hack in the world (the madcatz stuff would be easier), but at least it's locally available.
HTH
Mightyape currently has wired controllers (which have a good chance of being common line) at the low price of $50
http://www.mightyape.co.nz/product/Xbox-360/Xbox-360-Wired-Controller/1477425/
yeah be carefull with these. The solder points for them are really tight (not much larger than a pinhead).
Ive padhacked 2 of the common line controllers for other people, so gimme a scream if you want some advice.
On Stu's one I actually ripped the trace off the dpad for the right button, luckily the other side of the PCB has pretty decent solder locations as well...
Quote from: fluxcore on July 15, 2009, 02:14:44 PM
On Stu's one I actually ripped the trace off the dpad for the right button, luckily the other side of the PCB has pretty decent solder locations as well...
I had used the solder points on the non analog side. Only a few did I do on the analog side (I can't remember exactly what buttons)
i have a wired 360 controller im willing to part with for $35 if anybodys interested
has the rubbish bin icon too
cheers.
i have an already opened up controller(wireless) that my mate destroyed so i was going to make a stick but never got round to it, if anyone wants it let me know
New control pad for the xbox360. Made by hori so I'm wondering if this is going to be a common line pad (maybe even common ground if your lucky)
Comes out this month. (http://www.play-asia.com/paOS-13-71-dd-49-en-70-3jg9.html)
(http://3.bp.blogspot.com/_JSKir_A8voo/SrwTQhveCEI/AAAAAAAAACQ/YNoK2D2R9Uk/s320/Xbox+360+Pad+EX+2+with+Turbo.jpg)
Would this one be any good for padhacking?
http://www.slagcoin.com/joystick/pcb_diagrams/360_diagram5.jpg
Not sure how well are wireless controllers though for using as a aracde stick...
You can pad hack anything if you try hard enough. That one doesn't have even common line however, so dual mod is completely out of the question.
I am not planning to dual mod this one.
My question is that it seems to have like 5 COMMON? what are they for? I though the BROWN was teh GROUND? what are the other commons used for? can't I just use that GROUND(Brown) as the the Ground for all of my signals?
No. It's not common ground. It has split common points for other buttons, but they are not all common.
Also you would need to have batteries all the time.
I'd suggest just getting the pad that I recommended in the first post, or better one of the madcatz pads which are only available by luck in the states.
ah ic thanks for the heads up.
also in your first post above: http://slagcoin.com/joystick/pcb_diagrams/360_diagram1.jpg
that one has common ground but it is not good for Dual mod? why is that since its got common ground... I thought the MadCatz has the same properties as these with common ground? excuse my ignorance :D
Quote from: zosla on November 25, 2009, 10:03:27 AM
ah ic thanks for the heads up.
also in your first post above: http://slagcoin.com/joystick/pcb_diagrams/360_diagram1.jpg
that one has common ground but it is not good for Dual mod? why is that since its got common ground... I thought the MadCatz has the same properties as these with common ground? excuse my ignorance :D
Its common LINE, not common GROUND. He even says that in his post, and then has it in bold so that you dont miss it.
misread lol. my apologies :P